Specifications

Handset Configuration
Regional Settings
A31003-M2000-M100-1-76A9, 11/2012
6-34 OpenStage WL 3 / WL 3 Plus, Administration Manual
6.9.12 Replace Call Rejected with User Busy
Is used if the system does not support call rejected.
1. Select Device > General.
2. In the Replace Call Rejected with User Busy drop-down list, select “Enable”.
6.9.13 Busy on 1 / Disable call waiting
The default behavior is to indicate “call waiting” to the user. It is possible to
change this behavior so that the next incoming call is rejected and a busy
indication sent back to the SIP proxy.
1. Select Device > Call.
2. In the Busy on 1 / Disable call waiting drop-down list, select “Yes”.
6.9.14 Calling Line Restriction
The handset may be configured to hide the calling number and name to the called
party.
1. Select Device > Call.
2. In the CLIR (Calling Line Information Restriction) drop-down list, select “On”.
6.10 Regional Settings
This section includes settings suitable for a specific region or country.
6.10.1 Set Time & Date
1. Select Device > General.
2. In the Time zone drop-down list, select the applicable time zone.
3. In the NTP server field, enter the address to the time server. If not set, the IP
PBX address is used.
4. Select Device > Settings.
5. In the Time format drop-down list, select the applicable time format:
12h (for example 11:59 am/pm)
24h (for example 23:59)