Specifications

Handset Configuration
Alarm Settings
A31003-M2000-M100-1-76A9, 11/2012
6-28 OpenStage WL 3 / WL 3 Plus, Administration Manual
3. In the Alarm type for multiple press drop-down list or Alarm type for long press
drop-down list, select “Test alarm“.
4. In the Number for automatic call after alarm field, enter the number to be called
after an alarm has been activated (optional).
5. In the ALS drop-down list, select “Yes“ if an Acoustic Location Signal shall
sound when the alarm has been activated.
6. In the Text indication for alarm on multiple press field or Text indication for alarm
on long press, enter the text to be displayed in the handset when the alarm has
been activated.
7. In the Mode for automatic call after alarm drop-down list, select one of the
following:
• Monitor - The loudspeaker is muted and the microphone is on.
• Loudspeaker - The loudspeaker is turned on.
• Ordinary - The loudspeaker is turned off.
6.8.4 Emergency Call Alarm
If enabled, an alarm will be sent when the user calls the defined Emergency
number (for example 112).
1. Select Alarm > Emergency call.
2. In the Emergency call alarm drop-down list, select one of the following:
• On - An alarm will be sent when the user calls the emergency number.
• Off - No alarm will be sent when the user calls the emergency number.
3. In the Alarm type text field, enter the text to be displayed in the handset when
the alarm has been activated.
4. Select Device > Call.
5. In the Emergency number field, enter the emergency number.
If Emergency call alarm is enabled (see step 2), an alarm will be sent when the
user calls this number.
6.8.5 Man-down and No-movement Alarm
NOTE: Applicable to WL3 Plus only.