Specifications

Handset Configuration
Alarm Settings
A31003-M2000-M100-1-76A9, 11/2012
6-26 OpenStage WL 3 / WL 3 Plus, Administration Manual
Example 4
This example describes the message handling with the following message
settings:
• TTP= No prioritization
• TTR= Close manually
Tip: It is recommended to use these settings if messages regardless of priority
shall be read in chronological order, that is, the newest message shall be
displayed first.
Figure 4 Display messages in chronological order regardless of priority
In Figure 4, a message with priority 1 is received at 13:59. Another message with
priority 2 is received at 14:02 and will be displayed. The message with priority 1
is put in the message queue. The user needs to close the current message
(priority 2) to show the message (priority 1) in the queue. When closing the
message (priority 2) it will be indicated as a read message in the Messaging
Inbox.
6.8 Alarm Settings
NOTE: Applicable to WL3 Plus only.
The following alarm types can be configured; Push-button alarm, Test alarm,
Emergency call alarm, Man-down and No-movement alarm.
6.8.1 Common Alarm Settings
These settings are common for all alarms sent from the handset.
Prio 2
13:59
Prio 2
13:59
Prio 2
13:59
The user closes
the message
Prio 2
14:02
New messages
Prio 1
13:59
Prio 1
13:59
Prio 2
14:02
Messaging Inbox
Prio 2
14:02
Prio 1
13:59
Prio 1
13:59