Specifications

Handset Configuration
Messaging Settings
A31003-M2000-M100-1-76A9, 11/2012
OpenStage WL 3 / WL 3 Plus, Administration Manual 6-25
• TTR= 2 minutes
Tip: It is recommended to use these settings if the user shall not be interrupted
during 20 seconds while reading a message, unless a message with higher
priority is received. When the user has read a message, its priority is no longer
important, that is when TTP expires. In addition, if a message is not shown again
within the TTR interval, it is considered as not important and is removed from the
queue.
Figure 3 Message handling without manually closing a message.
In Figure 3, a message with prio 2 is received and displayed in the handset, TTP
and TTR for the message is started.
After 10 seconds, a second message with priority 1 is received and displayed
while the message with priority 2 is put in the queue. TTP for the message with
priority 2 is paused, but TTR continues. TTP and TTR for the message with
priority 1 is started.
After 20 seconds, TTP expires but TTR continues for the message with prio 1 and
the message is placed in the queue. The message with priority 2 is shown again
and its TTP continues.
TTP expires after 10 seconds but TTR continues for the message with priority 2.
In this case, all messages have been shown 20 seconds each, and the oldest
shown message with the highest priority is displayed (in this case, the message
with priority 1). The handset does not indicate when it shows the message again,
since it already has been shown and indicated once. The message with priority 2
is placed in the queue.
After 80 seconds, the TTR expires for the message with priority 2, and it is
removed from the queue and is indicated as an unread message in the
Messaging Inbox. When TTR expires for the message with priority 1, it is also
indicated as an unread message in the Messaging Inbox.
NOTE: If no messages have been read/closed manually and TTP expired for
each message, a dialogue window New message(s): [number of messages]. View
now? is displayed. All messages are indicated as unread messages in the
Messaging Inbox.
Prio 2
13:59
Prio 2
13:59
Prio 2
13:59
Prio 2
13:59
Prio 2
13:59
Prio 2
TTP expired
TTR expired
80 s.
Prio 2
TTP expired
TTR expired
Messaging Inbox
Prio 2
New messages
Prio 2
TTP paused
TTR continues
20 s.
Prio 1
TTP expired
TTR continues
10 s.
Prio 2
TTP expired
TTR continues
Prio 1
New messages
Prio 2
TTP started
TTR started
Prio 1
TTP started
TTR started
Prio 2
TTP and TTR
continues
Prio 1
TTP expired
TTR continues
Prio 2
TTP expired
TTR continues