Specifications

Handset Configuration
Messaging Settings
A31003-M2000-M100-1-76A9, 11/2012
OpenStage WL 3 / WL 3 Plus, Administration Manual 6-23
• Settings > Display
• Rotate display text
Determines if incoming messages shall be displayed upside down. This can
be useful if you wear the handset in a belt and want to read the message
without rotating the handset. When pressing any key, the messages will be
displayed in the normal way. Note: This setting also affects how incoming
calls shall be displayed.
6.7.1 Examples of TTR/TTP settings
Example 1
This example describes the message handling with the following message
settings:
• TTP= Prioritize forever
• TTR= Close manually
Tip: It is recommended to use these settings if messages with the highest priority
always shall be displayed until the user closes the current message.
Figure 1 How queuing and prioritizing for messages with equal messages
works
In Figure 1, a message with priority 2 is received at 13:59 and is displayed in the
handset. Another message with equal priority is received at 14:02 and will be
placed in the queue. If no messages with higher priority are received, the user
10 1 Yes, the call information will always be
suppress regardless of the message
priority.
Table 4Call prio vs Message prio
Prio 2
13:59
Prio 2
13:59
Prio 7
14:04
Prio 2
13:59
Prio 2
14:02
Prio 4
14:03
Prio 4
14:03
Prio 4
13:58
Prio 7
14:04
Prio 2
14:02
New messages
M
es
sa
g
e que
ue
Prio 4
14:03
Prio 4
13:58
Prio 7
14:04
Prio 2
14:02
M
es
sa
g
e q
u
e
u
e
The user closes
the message