Specifications

Handset Configuration
Messaging Settings
A31003-M2000-M100-1-76A9, 11/2012
6-22 OpenStage WL 3 / WL 3 Plus, Administration Manual
• Call priority
This parameter determines:
- whether call information presented on the display during incoming, ongoing
and outgoing call shall be suppressed when viewing a message
- whether an ongoing call shall be disconnected when receiving a PTT
invitation with Answer mode set to “Automatically”.
0 = Call indication will override all messages and ongoing call is never
disconnected (default).
1-9 = Comparison with message priority; highest priority will be shown and
PTT invitation with higher priority causes disconnection of ongoing call.
10 = Call indication on the display will always be suppressed and ongoing call
will always be disconnected by a PTT invitation.
The tables below show examples of priority settings and how they affect the
handset’s behaviour.
Call prio PTT invitation
(prio)
*
Disconnection of ongoing call?
0 1 No, since this call priority setting overrides all
PTT invitations regardless of priority.
6 6 No, an ongoing call will not be disconnected
when the priority is equal.
2 1 Yes, immediately since the PTT priority is set to 1
and also is higher than Call priority.
3 2 Yes, after 10 seconds since the PTT priority is
higher than Call priority.
10 1 Yes, immediately since the PTT priority is set to 1
and also is higher than Call priority.
10 2 Yes, after 10 seconds since the PTT priority is
higher than Call priority.
Table 3Call prio vs PTT prio
* PTT invitation received as incoming call has always priority 6, while PTT invitation received
as message can have priority 1 - 9 depending on configuration.
Call prio Displayed
Message (prio)
Call information suppressed?
0 1 No, since this call priority setting overrides
all messages regardless of priority.
7 6 Yes, since the priority of the displayed
message is higher than the incoming call.
6 6 Yes, since the message is considered as
most important when the priority is equal.
1 3 No, since the priority of the incoming call is
higher than the displayed message.
Table 4Call prio vs Message prio