Specifications

Handset Configuration
Messaging Settings
A31003-M2000-M100-1-76A9, 11/2012
OpenStage WL 3 / WL 3 Plus, Administration Manual 6-21
• Vibrator
Determines if the handset shall vibrate when receiving incoming calls and
messages.
• Message alert
Determines the message sound for incoming messages.
• Message volume
Determines the message volume for incoming messages. By default, the
message volume follows the ringer volume, but another message volume can
be set with this parameter.
Device > Messaging
• Message list representation
Can be set to text or number.
• Message text size
• Time to read (TTR)
Determines if the user needs to close a message manually, or if the message
automatically shall be closed when TTR expires. Regardless how a message
is closed, it is removed from the message queue and stored in the Messaging
Inbox. TTR starts when a message is displayed and keep running also when
the message is placed in the messaging queue. If a user presses any key
when a message is displayed, the TTR is reset. See also Section 6.7.1,
“Examples of TTR/TTP settings”, on page 23.
• Time to prioritize (TTP)
Determines how long messages shall keep their priority status. The TTP
starts when a message is displayed. If a user presses any key when a
message is displayed, the TTP is reset. If receiving a message with higher
priority than the displayed message, the message with lower priority is placed
in queue and its TTP is paused. When the TTP elapsed for a message, it is
put last in the queue. See also Section 6.7.1, “Examples of TTR/TTP
settings”, on page 23.
• Repeat message indication
This parameter enables/disables message indications. It sets whether a
message indication shall be repeated until confirmed by the user or not. The
current repetition rate is 7 seconds. If the message itself contains a repetition,
it overrides this setting.
• Vibrator for message during call
Determines if the handset shall vibrate when receiving messages during an
ongoing call.
• IM option mode
This parameter is used for older applications and sets that three soft keys
shall be placed automatically, i.e. on soft keys or in an option menu (list).