Specifications

Handset Configuration
Handset Settings
A31003-M2000-M100-1-76A9, 11/2012
6-18 OpenStage WL 3 / WL 3 Plus, Administration Manual
• Logout (applicable for the Shared Phone feature)
• Call diversions
• RSSI measurement
2. In the Va lue field, enter the applicable value. This is mandatory when using
Phone call function.
3. In the Control Question drop-down list, select “Enable“ if the Proceed? window
shall be displayed after the key is pressed. This is used to avoid that a
function is accessed by mistake.
4. In the Read Only drop-down list, select “True“ if the user shall not be able to
change the short cut.
6.5.13 Soft Key Functions During Call
It is possible to access a non-configurable function by pressing the right soft key
during a call.
1. Select Device > Call.
2. In the Right in call soft key name field, enter the name of the soft key to be
displayed during a call.
3. In the Right in call soft key action drop-down list, select one of the following
functions:
• Conference
• Contacts
• Messaging (if applicable)
• Disabled
• End Call
• Hold
• Loudspeaker
• New call (put active on hold)
• Retrieve
• Switch
• Transfer (to held call)
• Transfer to new call (blind transfer)