Specifications

Handset Configuration
Handset Settings
A31003-M2000-M100-1-76A9, 11/2012
OpenStage WL 3 / WL 3 Plus, Administration Manual 6-17
Configure a Hot Key
A hot key is activated by pressing a preprogrammed button “0”, “2“ - “9” for more
than 1 second in idle mode. The function is used, for example, to change profile,
send message or make a phone call to a specific number.
1. Select Short cuts > Hot keys X (where X is 0, 2 - 9).
2. Continue withSection 6.5.12, “Additional Short Cut Settings”, on page 17.
Configure Soft Key
1. Select Short cuts > Soft Key X (where X is Left, Middle, or Right)
2. In the Name field, enter the name of the soft key to be displayed in the
handset.
3. Continue withSection 6.5.12, “Additional Short Cut Settings”, on page 17.
Configure Navigation Key
1. Select Short cuts > Navigation Key X (where X is Up, Down, Left, or Right)
2. Continue withSection 6.5.12, “Additional Short Cut Settings”, on page 17.
Configure Multifunction Button
1. Select Short cuts > Multifunction button X (where X is Long press or Multi
press)
2. Continue withSection 6.5.12, “Additional Short Cut Settings”, on page 17.
Additional Short Cut Settings
1. In the Function drop-down list, select the function to be used:
• Phone call
• Phone call “Loudspeaker mode”
• Call List
• Contact list
• Central phonebook (system dependent feature)
• Message inbox
• Send a message
• Change profile (if selecting profile 1-4, the profile must first be configured,
see Section 6.5.6, “Configure Profiles”, on page 13.)
• Open a menu
• Services (Not applicable for WL3 Messaging)
1. The Multifunction button is applicable for WL3 and WL3 Messenger Upgrade only.