Specifications

Handset Configuration
Handset Settings
A31003-M2000-M100-1-76A9, 11/2012
6-12 OpenStage WL 3 / WL 3 Plus, Administration Manual
6.5.4 Headset Configuration
Headset type
Select the headset model that is used.
1. Select Headset > General.
2. Select the applicable item in the drop-down list:
NOTE: Do not select “Hearing protection” unless a Peltor headset is used.
• Hearing protection
• Mic on boom
• Mic on cable
• User model (If not any headset is used above, this option can be used to
configure an own headset profile. If selected, additional configuration is
required, seeSection 6.5.4, “Headset user model”, on page 12)
Headset user model
These settings are required if User model is selected under Headset > General.
1. Select Headset > User model.
2. In the Name of headset field, enter a descriptive name. For example the
headset model to be used.
3. In the following drop-down lists, select the applicable values for the headset:
• Microphone gain
• Speaker gain
• Side tone
NOTE: Changing the parameters may result in lower sound quality and high
sound level. Evaluate carefully before applying.
Corded headset button
1. Select Headset > General.
2. In the Call with headset button list, select one of the following:
• Not activated – it is only possible to answer/end a call.
• Last called number – the last called number will be dialled.