Specifications

Handset Configuration
Handset Settings
A31003-M2000-M100-1-76A9, 11/2012
OpenStage WL 3 / WL 3 Plus, Administration Manual 6-11
• Enable - activates automatic key lock.
• Disable - deactivates automatic key lock
6.5.2 Phone lock
Activate the phone lock to prevent unauthorized usage of the handset. A
password is required to unlock the handset in order to access its functions.
NOTE: If configured, it is possible to dial a pre-defined emergency number when
the handset is locked, see Section 6.9.6, “Emergency Number”, on page 32. It is
not recommended to use Phone Lock when using the Shared Phone feature, see
Section 6.5.9, “Shared Phone”, on page 15
1. Select Device > Settings.
2. In the Phone lock drop-down list, select one of the following:
• On - the handset will be locked after a few seconds when it is not used.
• On in charger - the handset will be locked when placed in charger.
• Off - the phone lock is disabled.
6.5.3 Audio adjustment
Select the volumes for the different audio signals in the handset.
1. Select Audio > Volume.
2. Select the applicable volumes item in the drop-down lists:
• Handsfree volume
• Headset volume
• Speaker volume
3. In the Persistent volume drop-down list, select “Enable” to automatically store
volume changes in the handset for future calls.
The parameter affects the “Normal”, “Headset“, “Loudspeaking“ mode.
For selection of headset, see Section 6.5.4, “Headset type”, on page 12.
NOTE: Changing this parameter may result in lower sound quality and high
sound level. Evaluate carefully before applying.