Specifications

Handset Configuration
Security Settings
A31003-M2000-M100-1-76A9, 11/2012
OpenStage WL 3 / WL 3 Plus, Administration Manual 6-7
1. Select Network > Network A (B, C, or D).
2. In the IP DSCP for voice and/or IP DSCP for signaling drop-down list, select
one of the following:
• 0x38 (56) - Class selector 7
• 0x30 (48) - Class selector 6
• 0x2E (46) - Expedited Forwarding (default for voice)
• 0x28 (40) - Class selector 5
• 0x20 (32) - Class selector 4
• 0x1A (26) - Assured forwarding 31 (default for signaling)
• 0x18 (24) - Class selector 3
• 0x10 (16) - Class selector 2
• 0x08 (8) - Class selector 1
• 0x00 (0) - Default
6.4 Security Settings
The WLAN system can be configured to use various encryption and/or
authentication schemes. The use of extensive encryption/authentication
schemes can cause incidents of dropped speech during handover due to the time
to process the authentication.
6.4.1 Open
Select Open if no encryption/authentication is required. To select Open as the
security mode, do the following:
1. Select Network > Network A (B, C, or D).
2. In the Security mode drop-down list, select “Open”.
6.4.2 WEP 64/128-bit Key
To select WEP64/128-bit Key as the security mode. Do the following:
1. Select Network > Network A (B, C, or D).
2. In the Security mode drop-down list, select “WEP64/128-bit Key”. Additional
parameters can now be set. See below.