Specifications

Handset Configuration
Network Settings
A31003-M2000-M100-1-76A9, 11/2012
OpenStage WL 3 / WL 3 Plus, Administration Manual 6-3
6.2.2 Static IP Address (Manual) Settings
1. Select Network > Network A (or B, C, D).
2. In the DHCP mode drop-down list, select “Disable (static mode)”. Additional
parameters will be displayed.
3. In the Phone IP address field, enter the unique IP address for the handset.
4. In the Subnet mask field, enter the subnet mask.
5. In the Default gateway field, enter the IP address for the default gateway.
DNS Server Settings
It is possible to configure which DNS server the handset shall use. If the primary
DNS server is available, it is always used. Otherwise, the secondary DNS server
will be used.
NOTE: The DNS parameters are only visible if the DHCP mode is set to “Disable
(static mode)”, see Section 6.2.2, “Static IP Address (Manual) Settings”, on page
3.
Primary DNS Server
1. Select Network > Network A (B, C, or D).
2. In the Primary DNS field, enter the IP address to the primary DNS server.
Secondary DNS Server
1. Select Network > Network A (B, C, or D).
2. In the Secondary DNS field, enter the IP address to the secondary DNS
server.
6.3 Network Settings
6.3.1 SSID
The SSID is the name of the network the handset associates to.
1. Select Network > Network A (B, C, or D).
2. In the SSID field, enter system SSID.
Note that the SSID is case-sensitive.