Specifications

Handset Configuration
Select Network
A31003-M2000-M100-1-76A9, 11/2012
OpenStage WL 3 / WL 3 Plus, Administration Manual 6-1
6 Handset Configuration
NOTE: This chapter describes settings in parameter definition files (.def). These
files are regularly updated and settings may change slightly. For example "On" to
"Enable" or a parameter can be moved to another directory.
The handset requires some settings to function in the VoWiFi system. All settings
are done in the PDMWSG. This section describes the available settings for the
handset. The first part explains network settings and the second handset settings.
For more information, see the PDM Online Help that is accessible for each
parameter by clicking the icon in the Edit parameters view, or the
Administration Manual for the Personal Device Manager.
NOTE: Configuring OpenStage WL3 Device to be used at OpenScape Voice
(OSV) see Appendix B in this Manual.
6.1 Select Network
The handset can switch between four different WLAN system configurations
called Network A, Network B, Network C, and Network D. The name can be
changed (via PDM or WSG) and is visible in the handset, see Section 6.1.2,
“Change Name of Network”, on page 2.
A handset can be configured for up to four different WLANs but only for oneWSG
and one VoIP System.
The configured networks in PDM must have a SSID value in order to view them
in the handset.
Network A is the default system and used throughout this manual.
1. Select Network > General.
2. In the Active network drop-down list, select “Network A”.
6.1.1 Change Active Network
1. Select Network > General.
2. In the Active network drop-down list, select “Network A“, “Network B“,
“Network C“, or “Network D“.