Specifications

Maintenance
Change Number of a Handset
A31003-M2000-M100-1-76A9, 11/2012
OpenStage WL 3 / WL 3 Plus, Administration Manual 5-15
8. In the PDM, select the “Licenses“ tab. Right-click the spare handset and
select “Refresh“.
The spare handset is restarted and the licenses for the broken handset in the
PDM has been transferred to the spare handset.
9. A Found Device Wizard window appears. Select “Associate with Number“ and
click “Next >“.
10. In the list, select the broken handset to be replaced with the spare handset.
Click “OK“.
The spare handset might be restarted and the settings for the broken handset
in the PDM has been transferred to the spare handset.
5.3 Change Number of a Handset
It is possible to change the number of a handset, but keep all other settings in the
handset.
1. Open PDMor the Device ManagerWSG.
2. Open the Numbers tab, and select the handset to be updated with a new
number.
3. In the Number menu, select “Rename...“. Alternatively, right-click the handset
and select “Rename...” from the menu that appears.
4. In the New prefix field, enter the new prefix (if needed).
5. In the New number field, enter the new number.
NOTE: Make sure that the new number does not exist in another system. If
several handsets have the same number, their settings will overwrite each other
when synchronizing with WSG/PDM.
6. Click “OK“.
The new number will be synchronized with the handset when it is connected to
PDM or WSG.