Manualshelf

Specifications

ManualsBrandsUnify ManualsConsumer electronicsOpenStage WL3 Plus
31323334353637383940
Maintenance
Replacement of Handsets
A31003-M2000-M100-1-76A9, 11/2012
OpenStage WL 3 / WL 3 Plus, Administration Manual 5-13
11. In the Device Manager, select the “Licenses“ tab.
12. Right-click the broken handset and select “Move license...“.
13. In the Move license window, select the WL3 that should receive the license.
Press “OK“.
14. The broken handset restarts and has now become a WL3. Switch off the
broken handset to make it offline in the Device Manager.
15. Switch on the spare handset to make it online in the Device Manager.
16. In the Device Manager, select the “Licenses“ tab. Right-click the spare
handset and select “Refresh“.
The spare handset is automatically updated from the WSGand restarted. The last
stored settings and licenses for the broken handset in the WSG has been
transferred to the spare handset.
5.2.4 Replacement of Handset with PDM Only
Replacement via PDM is used in small VoWiFi systems or when WSG is not
available.
• If the broken handset and the spare handset have the same device type and
functionality license, seeSection 5.2.4, “Replace without Move Licenses
using PDM”, on page 13.
• If the broken handset and the spare handset have not the same device type
and/or functionality license. The license must be moved to the spare handset,
see Section 5.2.4, “Replace and Move Licenses using PDM”, on page 14.
Replace without Move Licenses using PDM
Both the broken handset and the spare handset must be of the same device type
and have same functionality license.
1. In both handset, press *#34# in idle mode and select “License“ to check that
they have same device type and licenses.
Alternatively, if the spare handset has been factory reset, press “Info“ and
select “License“.
2. Put the broken handset in the Desktop Programmer (DP1) cradle.
3. Open the PDM.
4. Make sure that the handset is saved in the PDM. In the Numbers tab, a saved
handset has the symbol in the Saved column. If not, right-click the handset
and select “Save“ in order to transfer the settings to the spare handset later
on.