Specifications

Maintenance
Replacement of Handsets
A31003-M2000-M100-1-76A9, 11/2012
5-10 OpenStage WL 3 / WL 3 Plus, Administration Manual
2. If the broken handset is online in the Device Manager, switch off the handset
to make it offline.
3. Take a spare handset prepared with the network settings (including the IP-
address to the WSG).
4. Enter the Number and leave the password blank. Press “Login“.
The spare handset is automatically updated from the WSG and might be
restarted depending on the changed settings. The last stored settings for the
broken handset in the WSG has been transferred to the spare handset.
Replace and Move Licenses in WSG
The broken handset and the spare handset do not have the same device type
and/or have the same functionality license.
In order to move the licenses to the spare handset, it must be an unlicensed WL3.
To check that the handset is unlicensed, press *#34# in idle mode and select
“License“. Only WL3 must be displayed here.
1. Make sure that the broken handset is saved in the Device Manager (indicated
by a in the Saved column. If not, in the Numbers tab, right-click the broken
handset and select “Save“.
2. Switch off the broken handset to make it offline in the Device Manager.
3. Take an unlicensed spare handset (WL3) prepared with the network settings
(including the IP-address to the WSG).
4. Enter the number and leave the password blank. Press “Login”. The handset
is now online in the Device Manager.
5. Make sure that the spare handset is saved in the Device Manager (indicated
by a in the Saved column. If not, in the Numbers tab, right-click the spare
handset and select “Save“.
6. Switch off the spare handset to make it offline in the Device Manager.
7. Switch on the broken handset to make it online in the Device Manager.
8. In the Device Manager, select the “Licenses“ tab.
9. Right-click the broken handset and select “Move license...“.
10. In the Move license window, select the WL3 that should receive the license.
Press “OK“.
11. The broken handset restarts and has now become a WL3. Switch off the
broken handset to make it offline in the Device Manager.
12. Switch on the spare handset to make it online in the Device Manager.
13. In the Device Manager, select the “Licenses“ tab. Right-click the spare
handset and select “Refresh“.