Specifications

Maintenance
Replacement of Handsets
A31003-M2000-M100-1-76A9, 11/2012
OpenStage WL 3 / WL 3 Plus, Administration Manual 5-9
• If you have both PDM and WSG, and need to apply the network template to
the spare handset(s) to log on it later on, see Section 5.2.3, “Replacement of
the Handset with PDM and WSG”, on page 11.
• If you only have PDM, see Section 5.2.4, “Replacement of Handset with PDM
Only”, on page 13.
Data included in a replacement transfer
The following data is replaced during a replacement:
• User parameters
• Contacts (entered by the user)
Note that the following data is not replaced:
• Call list
• Messages
• Company phonebook
• Downloaded language
• Certificates
• Licenses
1
5.2.2 Replacement of Handset with WSG
There are two different replacement procedures as follows:
• If the broken handset and the spare handset have the same device type and
functionality license, seeSection 5.2.2, “Replace without Move Licenses in
WSG”, on page 9.
• If the broken handset and the spare handset have not the same device type
and/or functionality license. The license must be moved to the spare handset,
see Section 5.2.2, “Replace and Move Licenses in WSG”, on page 10.
Replace without Move Licenses in WSG
Both the broken handset and the spare handset must be of the same device type
and have same functionality license.
1. In both handsets, press *#34# in idle mode and select “License“ to check that
they have same device type and licenses.
If the login screen is displayed in the spare handset, press “Info“ and select
“License“.
1. A handset’s license(s) can be moved to an unlicensed handset (WSG) if following the replace-
ment instructions in Section 5.2.2, “Replace and Move Licenses in WSG”, on page 10.