Specifications

Maintenance
Handset
A31003-M2000-M100-1-76A9, 11/2012
OpenStage WL 3 / WL 3 Plus, Administration Manual 5-5
Press and hold the keys “7” and “8” and press On/Off key at the same time. The
handset loads the earlier software and will keep it as long it is not restarted.
5.1.7 Upgrade Handset Functionality using License
It is possible to upgrade a handset by downloading a license. The following
license is available:
• WL3 Messenger Upgrade License
There are three alternatives for upgrading a handset:
• Automatic upgrade, see Section 5.1.7, “Automatic license upgrade”, on page
5.
• License upgrade using import/export, see Section 5.1.7, “License upgrade
using import/export”, on page 6.
• Manual upgrade, see Section 5.1.7, “Manual license upgrade”, on page 6.
NOTE: A handset can be re-licensed up to 99 times.
Automatic license upgrade
Use this option if the PDM has an Internet connection to the License Server.
1. Open the PDM.
2. Put the handset in the Desktop Programmer (DP1) cradle.
First time the handset logs on the PDM, the license key will automatically be
downloaded to the handset, go to step 4.
3. If the handset has been logged on to the PDM before, no automatic check for
licenses will be done. The PDM and License Server must be synchronized as
follows;
• Select the “Licences“ tab.
• Right-click the handset in the list.
• Select “Refresh“.
The license key will now be downloaded to the handset.
4. The handset will be restarted. See also Section 5.1.7, “Upgrade Handset
Functionality using License”, on page 5 for viewing the handset’s license
option(s).
If the handset has been updated to a new device type (to WL3 Messenger
Upgrade License), both the new device and the old device is displayed in
PDM. The old device has to be manually removed.