Specifications

Installation of WLAN Handsets
Configure a Handset with a Template
A31003-M2000-M100-1-76A9, 11/2012
OpenStage WL 3 / WL 3 Plus, Administration Manual 4-9
4.4.3 Apply a Template to a Handset without a
Number
NOTE: This feature is only applicable for the PDM. However, in the Device
Manager inWSG, it is possible to apply a template to a handset without a number
using the Baseline function. The Baseline function or a template cannot be used
to download certificates to the handsets. See Installation and Operation Manual,
WSG, TDXXXXX.
It is possible to apply a template to a handset without a number in the PDM.
1. Put the handset in the Desktop Programmer (DP1) cradle.
2. In the Found Device Wizard window, select the “Run template“ option.
3. Click “Next >“.
Only templates with a parameter version matching the selected handset will be
shown.
4. Select the template that shall be applied and click “OK“.
The template is applied. The number of parameters in the template will affect the
time it takes to apply the template to the selected handset.
4.4.4 Save Handset Configuration as a Template
It is possible to save all settings of a handset as template. Note that this does not
include contacts, certificates and other personal data. The template will only
contain configuration data.
This template can be used as a backup if you want to restore the configuration of
the handset at a later stage or as a template that can be applied to a number of
handsets.
1. Open PDM or the Device Manager in the WSG.
2. In the Numbers tab, select the handset you want to save as a template.
3. Make a right-click and select “Use as a template...“. Enter a descriptive name
for the template.
4. The Edit template window is opened. By default, all parameters are selected
and are saved when clicking “OK“.
If one or more parameters should be excluded, remove them by clearing the
check box next to the parameter.