Specifications

Installation of WLAN Handsets
Installation with Central Device Management (WSG)
A31003-M2000-M100-1-76A9, 11/2012
OpenStage WL 3 / WL 3 Plus, Administration Manual 4-3
4.1.2 Create a Common Template in the WSG
Create another template with the common handset settings applicable to all
handsets (exclude the parameters and security settings configured in the
Network template). This template contains for example, hidden menu items in the
display, certain level of ring signal and vibrators.
NOTE: Only select the parameters that are changed, if all parameters are
selected the system performance decreases.
1. Open a web browser and enter the address to the WSG.
2. Click “Device Manager“.
3. Select the Templates tab and click “New“.
4. In the Device Type and Parameter version drop-down lists, select the
corresponding device type and parameter version to use, respectively.
5. In the Name field, enter a descriptive name of the template.
6. Set the specific parameters. See section Section 4.4, “Configure a Handset
with a Template”, on page 7 for more information.
4.1.3 Create Numbers in the WSG
Create a range of Numbers and apply the templates previously created in the
WSG.
NOTE: Do not add numbers already used because these handsets already exist
in the system although not saved in the Device Manager in WSG. The Device
Manager will overwrite the existing parameters in the handset.
NOTE: The parameter version of the template must be equal to or less than the
selected parameter version.
1. Open a web browser and enter the address to the WSG.
2. Click “Device Manager“.
3. Select the Numbers tab and click “New“. The New numbers window is opened.