Specifications

Installation of WLAN Handsets
Installation with Central Device Management (WSG)
A31003-M2000-M100-1-76A9, 11/2012
OpenStage WL 3 / WL 3 Plus, Administration Manual 4-1
4 Installation of WLAN Handsets
This section describes the recommended procedure for installing and configuring
handsets. There are several ways to install a handset, but the procedures
described here guarantees simple maintenance of the network.
It is recommended to use the Device Manager in WSG to install and maintain
handsets in a large network. The reason is that it enables to install, upgrade and
configure a large amount of handsets simultaneously. Another benefit is that the
collection of the handsets from the user is not needed due to configuration is
performed over the air (OTA). The handset must first be configured in the PDM to
access the WSG later on.
The PDM enables administration of one handset at the time inserted in a Desktop
Programmer (DP1) connected via USB to the administrator’s computer.
Installation steps in large VoWiFi Systems using WSG and PDM
NOTE: If the handset to be installed must use certificate to access a WLAN,
follow the instructions in chapter Section 4.2, “Installation without Central Device
Management(WSG)”, on page 5.
These WLAN settings are common network settings for all handsets.
1. Create templates in the Device Manager in WSG; one with network settings
and another with common settings.
2. Create Numbers and apply the templates.
3. Create a template with identical network settings in the PDM.
See Section 4.1, “Installation with Central Device Management (WSG)”, on page
1 for more information.
Installation steps in small VoWiFi Systems using PDM
1. Create Numbers.
2. Create one template for all settings in the PDM.
See Section 4.2, “Installation without Central Device Management(WSG)”, on
page 5 for more information.
4.1 Installation with Central Device Management (WSG)
When installing a large amount of handsets in a VoWiFi system, it is
recommended to have both the WSG and the PDM to make the maintenance and
handling of the system as simple as possible.