Specifications

Configuring OpenStage WL3 Device to be used at OpenScape Voice (OSV)
WL3 Steps
A31003-M2000-M100-1-76A9, 11/2012
B-2 OpenStage WL 3 / WL 3 Plus, Administration Manual
5. Listening Port: TCP Port (Example: 5060)
6. SIP Proxy Password: SIP Authentication password (This is the same pass-
word that is configured for Subscriber in Assistant for Realm Settings ( Sub-
scriber - > SIP Authentication -> Password))
7. Registration identity: Endpoint Number
8. Authentication identity: Endpoint ID ( see above VoIP > General #3)
9. Direct Signaling: Yes
B.2.2 Setup TLS Subscriber
VoIP > General
1. Offer Secure RTP: yes
2. Endpoint Number/ID: Subscriber Number ( Automatically Populated )
3. Endpoint ID: depending on OSV setup.
– Registration identity and Authentication identity is the same:
Subscriber Number
– Authentication identity is different to Registration identity:
ID to be used for SIP authentication
VoIP > SIP
1. SIP Transport: TLS
2. Validate Server certificate: No ( If yes, follow the Section 1.1.2.3)
3. Outbound Proxy mode: No ( Yes, if the subscriber is a Branch Subscriber)
4. Primary SIP Proxy: OSV SIP Signaling IP/FQDN
5. Listening Port: TLS Port ( Example: 5061)
6. SIP Proxy Password: SIP Authentication password (This is the same pass-
word that is configured for Subscriber in Assistant for Realm Settings ( Sub-
scriber -> SIP Authentication -> Password))
7. Registration identity: Endpoint Number
8. Authentication identity: Endpoint ID ( see above VoIP > General #3)
9. Direct Signaling: Yes
B.2.3 Setup the TLS Subscriber with Root Certificate
Follow all the above steps in Section 1.1.2.2