Specifications

Working with Templates
Import a Parameter File
A31003-M2000-M100-1-76A9, 11/2012
A-2 OpenStage WL 3 / WL 3 Plus, Administration Manual
See also Section A.3, “Import a Parameter File”, on page 2.
A.3 Import a Parameter File
The parameter version file (*.def) the template is based on, must have been
imported to the PDM to be able to import the template later on. If the parameter
file is not imported, do as follows:
1. Open the PDM.
2. Select “File“ > “File management“.
3. Select the “Parameter definition“ tab.
4. Click “Add“. The Import files window is opened.
5. Locate the parameter file (*.def), or the package file (*.pkg) where the
parameter file is included. Ask you supplier.
6. Click “Open“ to import the file.
A.4 Import a Template
1. Open the PDM.
2. Select “File“ > “Import“ > “Templates...“. The Import templates window is
opened.
3. Locate the template to be imported.
4. Click “Open“ to import the template.