Operating instructions

Personal alarm functionality 95
Alarm signal
An alarm signal/positioning tone can be issued by the handset in order to locate
the alerting party. Depending on the alarm type, it can be established whether or
not a positioning tone is to be issued in the event of an alarm.
The manual alarm can also be triggered with/without a positioning tone depend-
ing on the situation:
• Longpress – no positioning tone
• Shortpress – positioning tone
Communication with the alarm destination is only possible when the alarm sig-
nal/positioning tone is active if the alarm signal/positioning tone is disabled man-
ually with the "+" or "-" key. Manual suppression of the alarm signal can be con-
figured. The alarm signal suppression is only effective for the duration of the
connection.
Monitoring LED
The monitoring LED visually indicates the following PNG operating states:
Language support in Additional Features menu
The Additional Features menu is only available in German and English.
If you choose a language other than German when setting the language, the dis-
play output in the Additional Features menu will be in English.
Monitoring Off: continuously off
Monitoring On: flashing, 50 ms on/1000 ms off
Prealarm Active: flashing, 500 ms on/500 ms off
Alarm: continuously on
Technical Warning: continuously on
Automatic Alarm Off: flashing, 500 ms on/2000 ms off