Operating instructions

94 Personal alarm functionality
Alarming signal
If an alarming signal is triggered, the handset automatically generates alarm
calls to the configured alarm destination. The alerted party recognises the alert
-
ing party from the caller's phone number for example.
The alarm subscriber's phone number has to be transmitted for this purpose.
The communications system used must support the caller ID function.
In order to ensure if at all possible that an alarm call reaches the configured
alarm destination, the alarm calls are repeated cyclically. The duration and num
-
ber of alarm calls can be predefined.
The call duration and ringing interval are identical. The call duration and ringing
interval are incremented by one second after each alarm call.
Communication with the alarm destination is only possible for the duration of the
connection because of the automatic alarm call retry.
An alarm callback by the alarm server is possible for example if an alarm server
is being used. This server ends the alarm retries and establishes a voice con
-
nection to the alerting PNG. The alarm callback is answered automatically by the
PNG. Handsfree mode and handset mode are possible here.
Note:
In the case of alarm calls, call charges may be incurred for each alarm call.
Attention!
Please note the legal requirements with respect to using this functionality.
(Potential listening in option in the alarm status of the PNG).