Operating instructions

Conducting calls – enhanced functions 47
To select a different variable forwarding type, proceed as described on
 Page 45.
Checking forwarding
To check the status of the forwarding types, proceed as described on
 Page 45. The forwarding destination is shown in the second line if this vari-
able forwarding type is activated.
Activating and deactivating forwarding by means of an option
If a forwarding destination has been programmed for fixed forwarding, you can
use the option to activate and deactivate the forwarding facility. If variable for
-
warding is activated, it can only be deactivated with this option.
u Open the system menu.
> < [ Select and confirm the basic service.
> < [ Select and confirm the option shown.
> < [ Select and confirm the option shown.
> < [ Select the menu item and confirm. The call forwarding function is activated.
> < [ Select the menu item and confirm. Call forwarding is deactivated. This deletes
any destination number programmed for variable forwarding.
Automatic call forwarding
Forwarding of internal and external calls in the system can be configured and
activated for your line by service personnel. Calls can be forwarded:
• unconditionally
• when the line is busy
• when the call is not answered
Unconditional call forwarding should only be used if the line is for outgoing calls
only (for
example, in a lift).
If you have set up fixed or variable call forwarding and if the manually pro-
grammed forwarding destinations are not obtainable (for example, because they
are busy), then calls are automatically forwarded to the system forwarding des
-
tinations.
The function must be approved for your communications system.
BASIC SERVICE
SWITCHES
FORWARD
ACTIVATE
DEACTIVATE