Operating instructions

40 Conducting calls – enhanced functions

Using a different telephone in the same way

as your own

You can log on to another telephone belonging to the HiPath 4000 system via a

personal identification number or PIN (this includes telephones of networked

HiPath

4000 systems, for example, at other branches of your company). At the

other telephone you can then:

• make calls and assign the charges to cost centres,

• make calls and assign the charges to specific projects,

• check your mailbox,

• set appointments.

Using an internal PIN, you can have your calls diverted to a telephone in the of-

fice or department where you will be for a temporary period (call forwarding - "fol-

low me").

Prerequisite: You have been assigned a PIN by the service personnel. You re-

quire an internal PIN for calls within your own HiPath 4000 system, while for

calls involving other HiPath

4000 systems in the integrated network you require

a network-wide PIN.

u Open the system menu.

> < [ Select and confirm the basic service.

Either:

L  Enter the service code 

(61 for PIN 1, 62 for PIN 2 etc.).

Or:

> < [ Select the menu item and confirm.

If you have several PINs and wish to use another one, select the other PIN.

then:

You are prompted to enter the PIN by the message "Enter station no." or "Enter

ID" on the display.

The following applies within the actual HiPath 4000 system:

o Enter the internal PIN.

Entering the PIN for your own and another HiPath 4000 system within the

integrated network:

o Enter the 2-digit node code for your own HiPath 4000 system (consult service

personnel).

o # Enter your own number and press the hash key.

o # Enter the network-wide PIN and press the hash key.

Dialling after (successful) identification:

You will hear the dialling tone. The following appears on the display: 

"Please dial".

o Enter a phone number.

The function must be approved for your communications system.

BASIC SERVICE

PIN/COS

PIN 1?