Operating instructions

26 Conducting calls – the basic functions
Ending a consultation call and returning to the waiting call
Either:
> < [ If the consultation call/enquiry function was activated but a number was not yet
entered: Select the menu item and confirm.
> < [ Select the menu item and confirm.
You will be connected to the first party again. The second partner hears the busy
tone and hangs up; an OpenStage handset hangs up automatically.
Or
> < [
The second user hangs up. By pressing "TO WAIT. CALL ", you are reconnected
with the first party again.
However, you can also
• toggle between the partners  Page 56,
• set up a conference
 Page 57 or
• transfer the waiting partner to the second partner
 Page 55.
Answering or rejecting a call
Accepting a call
Your handset rings  Page 82. The caller information appears on the display.
The name and/or telephone number of the caller can be displayed. You have the
following options for answering a call:
k The handset is in the charging shell: Remove the handset from the charging
shell (only works if "Auto Answer" is active)
 Page 82.
c or d The handset is not in the charging shell. Press the Talk key or Speakerphone
key.
When you have accepted the call you can:
• transfer the call  Page 55,
• place the call on hold and consult with someone else in the room
 Page 54,
• place the call on hold and call a second partner
 Page 25 in order to forward
 Page 55 or toggle the call  Page 56 or to set up a conference  Page 57.
Deactivating the ringer for the current call:
If you are currently in a meeting, for example, and want to leave the room before
accepting the call:
[ Confirm the display message. The ringer is deactivated for the current call.
c or d Press the Talk key or Speakerphone key. The call is accepted.
TO WAIT. CALL
RETURN
TO WAIT. CALL
TURN RING OFF