Operation Manual

201

• You place the active line on hold during the call recording and then resume the

call on this line.

• You seize a different line during call recording. The first line is placed on man-

ual hold.

Prerequisite: The telephone has more than one line configured. The active call

is being recorded. The recording button LED is lighting. It is assumed that a

OpenScape Key Module 600 is connected for this example. If you do not have

a OpenScape Key Module 600, you have to open the Favourites menu to use

the line keys

 page 52.

Holding and retrieving the call on the line

[ You are making a call, for example on line 1. You hear a beep and the recording

symbol

| is shown on the display. The call is now being recorded.

Press line key 1. The line key LED lights up amber. The call is now on hold. The

recording is paused while the call is on hold. The recording symbol

| on the

display disappears.

Retrieving a held call:

Press line key 1. The line key LED lights up. The call is retrieved. You hear a

beep and the recording symbol

| is shown on the display again. Call recording

is continued.

Holding a call on the line and making a call on a different line

Press line key 2 – the LED lights up. You hear a beep and the recording symbol

| is shown on the display for line 2 – this call on line 2 is being recorded. Line

1 is placed on hold, call recording of line 1 has been terminated.

Press line key 1 to resume the call. You hear a beep and the recording symbol

| is shown on the display for line 1 – a new recording of line 1 commences.

Line 1

Line 2

Line 1