Operation Manual

141
Open using the Softkey.
The input field is displayed.
j Enter six zeros ("000000") to deactivate the password prompt. Confirm your in-
put with the Softkey.
Open using the Softkey.
The input field is displayed.
j Enter six zeros ("000000") once again. Confirm your input with the Softkey.
Save your input. The password is now deactivated:
Locking the phone
To protect the phone against unauthorized access, you can lock the phone so
that nobody can make calls or change settings without knowing the User pass-
word.
Predefined numbers from the dial plan can still be dialed when the phone is
locked. For more information, contact your administrator.
Activating the phone lock
# Hold down the key shown until the "Lock phone" message appears.
Press the Softkey to activate the lock.
or
\ Press the key shown to open the Presence menu.
Use the Softkey to lock the phone.
\ Press the key shown to exit the Presence menu.
Dialing emergency numbers
If an emergency number is entered on the phone by the administrator, Emer-
gency call appears on the display for selection when you have activated the
lock. You can also enter the emergency number via the dialpad.
Press the Softkey. The saved emergency number is dialed.
Unlocking the phone
The display shows: Phone locked.
New password
K
_
©
******
Q
_
Confirm password
K
_
©
******
Q
_
Q
_
You can only lock the phone if you set a User password  page 139. The
password for this must not be the default setting "000000". Check if nec-
essary whether the telephone lock function has been activated for you by
the administrator.
Lock
Ø
_
Lock phone
Ø
_
Emergency call 
_
œ Phone locked