Operation Manual

139
Activate with the Softkey.
Save the setting by selecting the Softkey.
Security
User password
Your User password protects your individual configurations, including your lan-
guage settings. You can also use the User password to lock your telephone
 page 141.
The administrator may have configured the following settings:
• The password is deactivated: You do not have the option of configuring user
settings. The message "Password is disabled" is displayed.
• The password is temporarily locked: You do not have the option of configuring
user settings at this time. The message "Password is suspended" is displayed.
• After initially logging on to a user area, you may have to replace the default
password with a new password.
• A password can have a predefined period of validity: You will have to create a
new password when the period ends. The message "Change password (x
days left)" will alert you to this at the appropriate time. The message "Pass-
word has expired" appears when the validity period is over. Confirm "Passwort
ändern" and change the password as described in this section.
• If you repeatedly enter the wrong password (2 to 5 times), additional attempts
are blocked. You can make another attempt after a predefined time.
• It is possible that you will not be able to re-use a previously used password for
a period of time, which means you have to create another "new password".
• Your administrator can tell you about the rules for what and how many charac-
ters can or must be used in the password.
z You can also configure this setting via the Web interface  page 207.
@ Press the key for the Main menu if appropriate.
Open using the Softkey.
Open using the Softkey.
if nec.
j Enter and confirm the User password.
€ Select the "Security" function.
Open using the Softkey.
Open using the Softkey.
Allow DND
¢_
Q
_
The preset password "000000" corresponds to a blank password. In other
words, the phone cannot be locked and the user menu is not password
protected (see also
 page 140).
Settings
_
$
User settings
-
_
$
Security
-
_
Change user password
-
_