Operation Manual

133
Lines with hot or warm line function
The function is activated when on
• the primary line
you lift the phone's handset or press the line or loudspeaker key
• the secondary line
you press the line key.
A number specified by you is dialed immediately with a hot line and after a spe-
cific time with a warm line.
Examples:
• The phone in the elevator immediately dials the reception number.
• The phone at a patient's bed dials the ward number after one minute, for ex-
ample, if no other number is dialed.
Settings for MultiLine (keyset)
The details for each keyset line contain supplementary information for the user.
The following non-editable fields are displayed:
•Address
– Displays the phone number for the line
• Ringer on/off
– Shows whether the ringer is activated for this line
• Selection sequence
– Displays the priority of each line seizure when the handset is lifted or the
loudspeaker key for this line is pressed
You can influence the following options:
• Ring delay
– The length of time before a held call is signaled on a line.
• Hot/warm dest.
– The phone number to be dialed if the hotline or warm line function is acti-
vated.
Example of details for a configured line
ñ
Your administrator has configured a hot or warm line for the primary line or
for a secondary line.
Ring delay
Hot/warm action
Hot/Warm line destination
Address
12
Details for keyset line x
: Primary line
3336
Hot line
3339