Operation Manual

131
Forwarding calls for the primary line
Call forwarding can only be activated for the primary line. Which call forwards
are possible, how they are configured and activated can be found from
 page 170.
Call forwarding information
If you have activated one of the forwarding types on your phone for the primary
line and a subscriber calls, an information window with the following information
opens:
Call from x forwarded to x
Dialing using the hot or warm line function
If you lift the phone's handset or press the loudspeaker key, a number is dialed
• immediately in the case of a hot line or
• after a defined period of time in the case of a warm line,
for the line specified by the administrator.
Examples:
• The phone in the elevator immediately dials the reception number.
• The phone at a patient's bed dials the ward number after one minute, for ex-
ample, if no other number is dialed.
During calls
Making and receiving calls on a single line
If you only use one line on your multi-line telephone to make calls, and you re-
ceive calls on the same line, the phone operates in the same way as a single-
line telephone:
• Number Redial
 page 180
• Consultation
 page 77
• Toggle/Connect
 page 79
• Callback
 page 73
•Hold
 page 81
• Call waiting (second call)
 page 82
• Transfer call
 page 84
• Conference
 page 79
Functions available exclusively for the primary line:
• Voicemail
 page 53
• Forward calls
 page 170
• Do not disturb
 page 138
ñ
Your administrator has activated "Forwarding shown".
ñ
Your administrator can configure a hot line or warm line for your phone.
Depending on your individual settings, you will be notified of incoming calls
 page 136.