Operation Manual

126

MultiLine

The next section describes the settings for a MultiLine phone and how to use a

MultiLine phone. To simplify understanding, we recommend first reading the

Section "Operating your OpenScape Desk Phone CP600/

CP600E (

 page 31)". Refer to  page 133 for a detailed description of the set-

tings.

Line/trunk keys

Programmable keys can be configured by your administrator as line or DSS

keys in the Favourites menu or if you have connected a OpenScape Key Mod-

ule 600. The Favourites menu could look as follows for example:

These function keys cannot be changed or deleted by the user.

Each key programmed with the "Line" function is handled as a line. This means

up to 4 line keys can be configured in the Favourites menu or up to 12 keys on

the OpenScape Key Module 600.

A distinction is made here between primary, secondary and phantom lines. Each

of these line types can be used on a private or shared basis

 page 127.

Primary line

All multi-line telephones have a primary line. This line can be reached in the usu-

al manner via your public phone number. Incoming calls to your number are sig-

naled on this line.

Secondary line

A secondary line on your phone is used as a primary line by another subscriber

of the line trunk group. Your primary line, which is configured on another tele-

phone of a line trunk group, simultaneously functions as the secondary line on

that telephone.

This function is not available to you on an OpenScape 4000, see

 page 219.

To avoid conflict between individual multi-line phones, the functions "Do

not disturb" and "Call forwarding" can only be used for the primary line.

Favourites

AICS Zip tone

Line

DSS

Available