Operation Manual

120
Making calls in the team
Group call
Your administrator can incorporate multiple telephones in a call pickup group. If
your telephone belongs to a pickup group, you can also accept calls intended for
other members of the group.
A group call is displayed on the phone. The administrator may have made the
following settings for signaling:
The volume settings can be found from
 page 63.
Telephone status Ring on group call =
Yes
Ring on group call = No
Ringer on Silent ringing Ringer
Speaker
Beep
Speaker
in
connection
Handset Ringer
Speaker
Beep
Handset
Handset
Open listening
Beep
Handset and loud-
speaker
Beep
Handset and loudspeaker
Headset Ringer
Speaker
Beep
Headset
Headset
Open listening
Beep
Headset and loud-
speaker
Beep
Headset and loudspeaker
Speakerphone
mode
Beep
Speaker
Beep
Speaker
Ringer off Silent ringing Nothing Nothing
in
connection
Handset Nothing Beep
Handset
Handset
Open listening
Beep
Handset and loud-
speaker
Beep
Handset and loudspeaker
Headset Nothing Beep
Headset
Headset
Open listening
Beep
Headset and loud-
speaker
Beep
Headset and loudspeaker
Speakerphone
mode
Beep
Speaker
Beep
Speaker
ñ
Further administrator settings for group calls:
• The group call can be picked up both by lifting the handset and via the
"Pickup call" menu option.
• The group call can be picked up via the "Pickup call" menu option but not
by just lifting the handset.
• A key is programmed for Call pickup.
• A message is output on the display with the Call pickup key when a
group call is waiting.