Operation Manual

115
Programming a key
Initiating programming
Directly via the key on the OpenScape Key Module 600
Hold down the Function key on the OpenScape Key Module 600 to which a func-
tion is to be assigned until the programming prompt is displayed.
Press the Softkey to open the programming.
or
Via the user menu for the OpenScape Key Module 600
@ Press the key for the Main menu if appropriate.
Open using the Softkey.
Open using the Softkey.
if nec. j Enter and confirm the User password.
€ Select "Phone".
Open using the Softkey.
Open using the Softkey. You are prompted to press the key you wish to program.
Press the Function key you want to program with a function. The key LED lights
up constantly.
or
Via Favourites, if no key module is connected
@ Press the key for the Main menu if appropriate.
Open using the Softkey.
Press the Softkey for K to access edit mode.
€ Select the space with "Unallocated" or a function you want to replace.
Press the Softkey to assign the function key.
_
OK
_
If the prompt is not displayed or a programmed function is not executed,
you can only launch key programming via the user menu (consult your ad-
ministrator about the current setting).
Settings
_
$
User settings
-
_
$
Phone
-
_
Program keys
-
_
_
Favourites
_
Favourites
K
_
Unallocated
K
_