Operation Manual

108
Connecting/disconnecting a Bluetooth device automatically
If your Bluetooth device is proximity-system enabled, you can activate Proximity
Monitoring. If the paired device comes into the immediate vicinity of the Open-
Scape CP 600, the connection is established automatically. If the device is re-
moved from the vicinity, the connection is dropped automatically. The default
setting is for Proximity Monitoring to be disabled.
@ Press the key for the Main menu if appropriate.
Open using the Softkey.
Open using the Softkey.
if nec. j Enter and confirm the User password.
Open using the Softkey.
Open using the Softkey.
Paired devices are displayed.
€ Select the relevant Bluetooth device.
« And open it. The status of the device is displayed and activated, for example,
with "(aud)".
Open the Configuration menu with the Softkey.
€ Select the "Proximity Monitoring" function.
Activate with the Softkey.
Proximity Monitoring is activated.
Setting the Proximity Threshold
You can set the Proximity Threshold if appropriate to suit the required circum-
stances.
Open the setting for the Proximity Threshold by selecting the Softkey
1
.
Use the Softkey to increase the proximity.
or
Use the Softkey to reduce the proximity.
Settings
_
$
User settings
-
_
$
Bluetooth
-
_
Paired devices
-
_
You receive a message that the OpenScape CP 600 is now visible for oth-
er Bluetooth devices while you are in this menu.
?
Headset
- Š
¢_
U
_
Proximity Monitoring
¦_
?
Headset
-Šš
¢_
..Proximity Threshold
K
_
1. The phone displays the current setting
Increase
X
_
Decrease
Œ
_