Operation Manual

104
Bluetooth settings
Activating and deactivating Bluetooth
z You can also configure this setting via the Web interface  page 207.
@ Press the key for the Main menu if appropriate.
Open using the Softkey.
Open using the Softkey.
if nec. j Enter and confirm the User password.
Open using the Softkey.
Open using the Softkey.
Activate with the Softkey. The Bluetooth function is activated and is now avail-
able.
Save the setting by selecting the Softkey.
Changing the Bluetooth name of your OpenScape
CP 600
Here you can determine which name your OpenScape CP 600 should use to
register at other Bluetooth devices.
z You can also configure this setting via the Web interface  page 207.
@ Press the key for the Main menu if appropriate.
Open using the Softkey.
Open using the Softkey.
if nec.
j Enter and confirm the User password.
Open using the Softkey.
ñ
The Bluetooth function was activated for your phone by the administrator.
Settings
_
$
User settings
-
_
$
Bluetooth
-
_
Configuration
-
_
Active
¦_
Q
_
By factory default, the Bluetooth name is: IntegratedPhone.
If you are currently in the Bluetooth configuration, then the phone is visible.
If you exit the menu, it will be hidden again after a short time.
Settings
_
$
User settings
-
_
$
Bluetooth
-
_