Operation Manual

Administration
A31003-D3000-M100-02-76A9, 11-2013
66 OpenScape Desk Phone IP V3R3, Phone Administration, Administrator Documentation
IP Network Parameters
3.3.4.1 How to Manually Configure the Phone´s IP Address
Prerequisites
• If not provided by DHCP dynamically, the phone’s IP address and subnet
mask must be specified manually.
INFO: IP addresses can be entered in the following formats:
– Decimal format. Example: 11.22.33.44 or 255.255.255.0 (no leading
zeroes).
– Octal format. Example: 011.022.033.044 (leading zeroes must be used
with every address block)
– Hexadecimal format. Example: 0x11.0x22.0x33.0x44 (prefix 0x must be
used with every address block)
• By default, IP configuration by DHCP and LLDP-MED is enabled. For manual
IP configuration, please proceed as follows:
Administration via WBM
Step by Step
1) Navigate to Network > General IP Configuration. Set DHCP Enabled,
DHCPv6 Enabled and LLDP-MED Enabled to "not selected". Afterwards,
click Submit.