Operation Manual

A31003-D3000-M100-02-76A9, 11-2013
OpenScape Desk Phone IP V3R3, Phone Administration, Administrator Documentation 63
Administration
IP Network Parameters
Administration via WBM
Network > General IP configuration
Set the Protocol Mode to IPv4 or IPv6 or both (the default setting is IPv4_IPv6).
Afterwards, click Submit.
Administration via Local Phone
Related To pics
Related Topics
•
IP Network Parameters
3.3.3 Use DHCP
If this parameter is set to "Yes" (default), the phone will search for a DHCP server
on startup and try to obtain IP data and further configuration parameters from that
central server.
If no DHCP server is available in the IP network, please deactivate this option. In
this case, the IP address, subnet mask and default gateway/route must be
entered manually.
INFO: The phone is able to maintain its IP connection even in
case of DHCP server failure. For further information, please refer
to DHCP Resilience.
The following parameters can be obtained by DHCP:
Basic Configuration
• IP Address
• Subnet Mask
|
--- Admin
|--- Network
|--- General IP Configuration
|--- Protocol Mode