Operation Manual

Administration
A31003-D3000-M100-02-76A9, 11-2013
58 OpenScape Desk Phone IP V3R3, Phone Administration, Administrator Documentation
IP Network Parameters
3.2.3 LLDP-MED Operation
OpenScape Desk Phones support LLDP-MED (Link Layer Discovery Protocol-
Media Endpoint Discovery) for auto-configuration and network management. The
auto-configurable parameters are VLAN ID (see VLAN) and Quality of Service
parameters (see Quality of Service (QoS)).
The data sent by a network device is stored in neighboring network devices in MIB
(Management Information Base) format. In order to keep this information up-to-
date, a specific TTL (Time To Live) is specified in LLDP. This value tells a device
how long the received information is valid. For OpenScape Desk Phones, the
value range is 40, 60, 80, 100, 110, 120, 140, 180, 240, 320, 400.
An example for LLDP-MED operation on OpenScape Desk Phones can be found
in An LLDP-Med Example.
Administration via WBM
Network > LLDP-MED operation
Administration via Local Phone
Related Topics
Related Topics
LAN Settings
3.3 IP Network Parameters
Related Topics
Related Topics
Administration
Quality of Service (QoS)
Protocol Mode IPv4/IPv6
Use DHCP
IP Address - Manual Configuration
Default Route/Gateway
|
--- Admin
|--- Network
|--- LLDP-MED operation
|--- TTL
|--- TTL