Operation Manual

A31003-D3000-M100-02-76A9, 11-2013

OpenScape Desk Phone IP V3R3, Phone Administration, Administrator Documentation 57

Administration

LAN Settings

3.2.2.3 Manual Configuration of a VLAN ID

To configure layer 2 VLAN manually, make sure that VLAN discovery is set to

Manual and LLDP-MED is disabled. Then, the phone must be provided with a

VLAN ID between 1 and 4095. If you mis-configure a phone to an incorrect VLAN,

the phone will possibly not connect to the network. In DHCP mode it will behave

as though the DHCP server cannot be found, in fixed IP mode no server connec-

tions will be possible.

Administration via WBM

Network > General IP configuration

The phone must be provided with a VLAN ID between 1 and 4095. Set the VLAN

discovery to Manual. Afterwards, click Submit.

Administration via Local Phone

To enable VLAN discovery via Manual operation, select Manual in the VLAN

discovery option.

Related To pics