Operation Manual

A31003-D3000-M100-02-76A9, 11-2013
OpenScape Desk Phone IP V3R3, Phone Administration, Administrator Documentation 35
Startup
Quick Start
16) Select the Advanced tab. Under Vendor class, select the class that you
previously defined (OptiIpPhone) and, under User class, select Default
User Class.
Activate the check boxes for the options that you want to assign to the scope
(in the example, 001, 002, and 003). Click OK.
17) The DHCP console now shows the information that will be transmitted to the
corresponding workpoints. Information from the Standard vendor is trans-
mitted to all clients, whereas information from the OptiIpPhone vendor is
transmitted only to the clients (workpoints) in this vendor class.
Related To pics
Related Topics
•
Vendor Specific: VLAN Discovery and DLS Address