Operation Manual

A31003-D3000-M100-02-76A9, 11-2013
OpenScape Desk Phone IP V3R3, Phone Administration, Administrator Documentation 25
Startup
Quick Start
input form is presented to the user/administrator right after booting, unless the
Plug&Play facility of the DLS is used. For further information about this
setting, please refer to
Terminal Identity. With the WBM, the terminal number
is configured as follows:
Step by Step
1) Log on as administrator to the WBM by entering the access data for your
phone.
2) In the Administrator menu (left column), select System > System Identity to
open the "System Identity" dialog. Enter the terminal number, i. e. the SIP
name / phone number. For further information, please refer to
Terminal
Identity
.
Related To pics
Related Topics
•
Quick Start
2.3.3 Basic Network Configuration
For basic functionality, DHCP must provide the following parameters:
• IP Address: IP Address for the phone.
• Subnet Mask (option #1): Subnet mask of the phone.
• Default Route (option #3 "Router"): IP Address of the default gateway which
is used for connections beyond the subnet.
• DNS IP Addresses (option #6 "Domain Server"): IP Addresses of the primary
and secondary DNS servers.
If no DHCP server is present, see IP Address - Manual Configuration for IP
address and subnet mask, and Default Route/Gateway for the default route.
Related To pics
Related Topics
•
Quick Start