Operation Manual

A31003-D3000-M100-02-76A9, 11-2013
OpenScape Desk Phone IP V3R3, Phone Administration, Administrator Documentation 23
Startup
Quick Start
• Basic Network Configuration
• DHCP Resilience
• Date and Time / SNTP
• SIP Server Address
• Extended Network Configuration
• Vendor Specific: VLAN Discovery and DLS Address
• How to Register at OpenScape Voice
2.3.1 How to Access the Web Interface (WBM)
Prerequisites
• The phone´s IP address or URL is required for accessing the phone´s Web
Interface via a web browser. By default, the phone will automatically search
for a DHCP server on startup and try to obtain IP data and further configu-
ration parameters from that central server.
• If no DHCP server is available in the IP network or if the DHCP parameter is
disabled, the IP address, subnet mask and default gateway/route must be
defined manually.
• To obtain the phone´s IP address, proceed as follows:
Step by Step
1) Access the local phone´s Admin menu as described in
Access via Local
Phone
.
• If DHCP is enabled (default): In the Admin menu, navigate to Network >
IPv4 configuration > IP address. The IP address is displayed.
• If DHCP is disabled or if no DHCP server is available in the IP network,
the IP Address, Subnet Mask and Default Route/Gateway must be
defined manually as described in
How to Manually Configure the Phone´s
IP Address
.
2) Open your web browser (MS Internet Explorer or Mozilla Firefox) and enter
the appropriate IP address or URL.
Example: https://192.168.1.15 or https://myphone.phones