OpenScape SL6 DECT - User Guide
Table Of Contents
- Contents
- Safety precautions
- Getting started
- Using the telephone
- Additional functions
- Setting the handset
- Appendix
- Accessing system functions
- Making calls to multiple parties
- Caller list
- Central directories (group directory)
- Call forwarding
- Mailbox
- More features
- Making calls using project assignment (cost billing)
- Callback
- Using a different telephone in the same way as your own
- Caller ID suppression
- Activating/deactivating do not disturb
- Tracing a call
- Entering commands via tone dialing (DTMF suffix dialing)
- Parking/activating calls
- System-wide speaker call
- System appointment function
- Locking the telephone line to prevent misuse
- Index
More features 65
More features
Making calls using project assignment (cost
billing)
You can assign external calls to certain projects.
Prerequisite: Project numbers (from 1 to 5) have been configured for certain
projects and you have an account code (ACCT) for the project.
u Open the system menu.
s t w Select and confirm the basic service.
Either:
o Enter a service code between 61 (for project number 1) and 65 (for project
number 5).
o Enter the PIN
Or:
s t w Select the menu item and confirm.
s t w Select the required PIN and confirm.
Then:
o Enter the external phone number.
Then make your phone call as usual page 14.
Note:
The function must be approved for your communications system.
BASIC SERVICE
PIN / COS?
PIN 1?
...
A time limit is applied to project assignment. It is automatically
deactivated if you have not used your handset for a period of more than
five minutes, for instance.