User guide

66 Additional functions
Data communication with the PC
So that your handset can communicate with your PC, you must install the "Gi-
gaset QuickSync" application on your PC (download for free at www.gigas-
et.com/gigasets790).
Once you have installed "Gigaset Quick-Sync" you can connect the handset to
your PC via Bluetooth
 Page 67 or a USB data cable Page 17.
If you want to use the Bluetooth connection on your PC, your PC must have a
corresponding dongle.
Transferring data
Launch the "Gigaset QuickSync" application. Now you can:
• synchronise your handset’s address book with Outlook,
• Transfer CLIP images (.bmp) from the computer to the handset,
• Transfer images (.bmp) as a screensaver from the computer to the handset.
• Transfer sounds (ringtone melodies) from the PC to the handset.
Data transfer is shown on the display during data transfer between the handset
and PC. No inputs are possible via the keyboard when this operation is active
and incoming calls are ignored.
Note:
If the USB data cable is connected, is not possible to establish a Bluetooth
connection. If a USB data cable is connected during an established Blue
-
tooth connection, the Bluetooth connection is interrupted.