User guide

56 Conducting calls – with multiple users

Leaving a conference

a Press the On-hook key. You leave the conference.

When one user leaves the conference, the other two users remain connected.

Second call (call waiting)

If the call waiting function is set up, you can accept second calls on your hand-

set.

When a second call is incoming (call waiting), you will be informed of the second

call during a call by a call waiting tone and a message on the display. The caller

hears a ring tone. You can decide whether to accept or reject the second call.

You can activate and deactivate second calls. If the function is deactivated, the

second caller hears a busy tone or is forwarded to another number

 Page 44.

Activating call waiting

u Press the INT key.

> < [ Select the menu item and confirm.

> < [ Select the menu item and confirm. 

> < [ Select the menu item and confirm. The display shows "activated".

a Press the On-hook key to end the operation.

To deactivate, repeat the procedure.

Placing the call on hold, accepting the second call

p You are on a call and hear the call waiting tone.

Open the system menu.

> < [ Select the menu item and confirm. You are connected to the second caller. The

first call is now on hold.

You can now:

• Transfer the call  Page 54

• Toggle between calls

 Page 55

• Initiate a conference

 Page 55

Telephony

Call Waiting

deactivated

Call accept