User's Guide

Unifly Operator App User Guide Rel. 2.3
Page 3 of 27
Features
• Highly accurate GNSS module (GPS, Galileo, Glonass)
• Multi-band cellular (LTE Cat 1) communication
• Bluetooth Low Energy v5.0 (BLE) communication for mobile app connectivity
• Secure pilot authentication via BLE
• Integrated battery with Qi-compliant wireless charging
• Weatherproof IP 67 enclosure
• Wide operating temperature range from -20 °C to +55 °C
• Pressure sensor (altimeter) measuring pressure altitude
• Temperature sensor
• Built-in 3-axis MEMS accelerometer
• Nordic-based MCU (ARM Cortex M4F processor)
• EEPROM memory for the flight data cache
• RGB LEDs for power, network and GNSS state indication
• Encrypted and authenticated communication
• Micro-SIM card slot
• Lithium Polymer battery (3.7V / 2100 mAh) with battery capacity and operation time estimation
Mounting BLIP on your drone
The BLIP can either be mounted on top or on the bottom of a drone.
The advice is to use a Dual Lock reclosable fastener (i.e. 3M brand) allowing to mount the BLIP on a variety of
substrates.
Test results indicate that mounting the BLIP upside down on the bottom of the drone return the best Bluetooth range
results (up to 200m).
Figure 2: A top mounted BLIP